How To Repair Samsung Washer 0e Error

Samsung washing motorcar Not filling in allocated time error lawmaking 4E and E1 Fault
This is essentially a fill up timeout fault which will unremarkably hateful that either the h2o isn't on or that an inlet valve has failed or pressure switch trouble check pipes as well.
Water fill time out:
The washing machine has failed to fill with water in a reasonable time.

If there is no higher modify in water frequency than 100Hz for 2 minutes during the initial time of water supply and if water level doesn't accomplish the preset level in 10 minutes, this fault volition occur.
This error volition exist released using Start/Pause push, the washing machine will restart and attempt to fill with water again.

Check water supply is on, articulate and not frozen
Check the air chamber and pressure sensor hose for blockages and check the pipes for any holes
Check water inlet valve
Bank check wiring to h2o inlet valve
Cheque connections to water inlet valve
Cheque the main control PCB

Earlier doing whatsoever work on the appliance, disconnect information technology from the electric supply!

The machine will exist displaying the error 4E and E1.
Check the mains h2o is coming to the machine at the correct pressure.
Check the filter on the h2o valves.
Bank check the inlet water valves by doing a continuity test on them Meet our video on how valves work.
Cheque the wiring coming from Pcb and pressure switch and as well check connections.
Strip down the machine to to clean pressure bowl and pipes that run to the pressure switch.
reasemble the washing machine and put it through a rinse cycle to test the machine. If all is ok trouble is fixed